Unhandled event type: about sia HOT 6 CLOSED

Thanks! @moodiejo, one other question, I see three events types that are unhandled, CG, CF and OG, seems like CG and OG are for arming and disarming one particular area, is that when you use the Groups function in Ajax? and what causes the CF state (System armed, some zones not ready), does that mean you arm one area, but in another area a door is open or something?

from sia.

Hi, I have 4 groups configured, with different sensors on each zone. I am therefore using groups within the Ajax. All 4 groups have been detected by the component, and 4 individual alarm_control_panel entities within HA have been created.

This behaviour occurs irrespective of how I try to disarm or arm the alarm. Let me try and give better examples. In the example below, I have armed a single Group, named 'Outside Not Pet Friendly' and the log shows this:

2019-09-12 19:43:18 DEBUG (Thread-3) [custom_components.sia] Income raw string: 31AC0075"*SIA-DCS"3088L0#FED[8C66611F50B6A868B90771F4953E67C388CCFAEA1B86B1BF9187483D4A425B85B35A2E23A363ABD5D380E224DFB37A3E
2019-09-12 19:43:18 DEBUG (Thread-3) [custom_components.sia] EncryptedHub.process_line31AC0075"*SIA-DCS"3088L0#FED[8C66611F50B6A868B90771F4953E67C388CCFAEA1B86B1BF9187483D4A425B85B35A2E23A363ABD5D380E224DFB37A3E
2019-09-12 19:43:18 DEBUG (Thread-3) [custom_components.sia] EncryptedHub.process_line found data: [8C66611F50B6A868B90771F4953E67C388CCFAEA1B86B1BF9187483D4A425B85B35A2E23A363ABD5D380E224DFB37A3E
2019-09-12 19:43:18 DEBUG (Thread-3) [custom_components.sia] EncryptedHub.manage_string data: E��d���%�!�|#FED|Nri4/CG501]_17:43:17,09-12-2019
2019-09-12 19:43:18 DEBUG (Thread-3) [custom_components.sia] Parsing: |#FED|Nri4/CG501]_17:43:17,09-12-2019
2019-09-12 19:43:18 WARNING (Thread-3) [custom_components.sia] Unhandled event type: Code: CG, Type: Close Area, Description: System has been partially armed, Concerns: Area number, Message: CG501

I have now armed a different Group, named 'Outside Pet Friendly' and the log shows:

2019-09-12 19:45:18 DEBUG (Thread-3) [custom_components.sia] Income raw string: 31160075"*SIA-DCS"3093L0#FED[BAD63D5932E2596C63FEC6A6DBD32DEFB7355C84C5AEBF4F4848D65C5C2FB0A8EACC13E4B0FA42D7A52EB8973C147A12
2019-09-12 19:45:18 DEBUG (Thread-3) [custom_components.sia] EncryptedHub.process_line31160075"*SIA-DCS"3093L0#FED[BAD63D5932E2596C63FEC6A6DBD32DEFB7355C84C5AEBF4F4848D65C5C2FB0A8EACC13E4B0FA42D7A52EB8973C147A12
2019-09-12 19:45:18 DEBUG (Thread-3) [custom_components.sia] EncryptedHub.process_line found data: [BAD63D5932E2596C63FEC6A6DBD32DEFB7355C84C5AEBF4F4848D65C5C2FB0A8EACC13E4B0FA42D7A52EB8973C147A12
2019-09-12 19:45:18 DEBUG (Thread-3) [custom_components.sia] EncryptedHub.manage_string data: ��nžeq/�?�|#FED|Nri3/CG501]_17:45:17,09-12-2019
2019-09-12 19:45:18 DEBUG (Thread-3) [custom_components.sia] Parsing: |#FED|Nri3/CG501]_17:45:17,09-12-2019
2019-09-12 19:45:18 WARNING (Thread-3) [custom_components.sia] Unhandled event type: Code: CG, Type: Close Area, Description: System has been partially armed, Concerns: Area number, Message: CG501

The CF state occurs when I try and arm a group, and as an example, I have a door that is open that is linked to that Group, and the door has the Ajax Door Contact, which at that stage would be deemed open.

from sia.

So, the CG are taken care of, I'll update this repo today, just for the CF state, what would be the expected state for that Alarm in HA? keep it at Disarmed, or set it to Armed? I'm a bit limited by the possible states that HA has for alarms (see here).

from sia.

Good question, I am leaning towards 'armed_custom_bypass'

The Group is actually armed, however, some sensors are bypassed....

from sia.

Just added those, please have a look @moodiejo

from sia.

Hi,

The component is installed, looks good so far.

I will let it run for a few days, and report back

Thank You !

from sia.