1-wire protocol not decoded about dsview HOT 5 CLOSED

0.3 version - still not decoded http://screenshots.ryotsuke.ru/scr_0668410cf25b.png

from dsview.

It detects some blocks of something, but no info http://screenshots.ryotsuke.ru/scr_ab1e2e1f5c4c.png

from dsview.

https://www.dropbox.com/s/9poyh2muz9hrvuq/TestOneWireCapture.dsl
This is a capture of 1-wire protocol reading Dallas temperature sensor

from dsview.

Works! But decodes not everything. It still skips some data
http://screenshots.ryotsuke.ru/scr_d60c7b2cb47e.png
This is data I actually is most interested in - I guess this should be device reply data
https://www.dropbox.com/s/37idyjb1hni6rdm/TestOneWireCapture3.dsl

The second issue I should mention - is GUI eating values. I think it would be better to left align text and start with data values. So if I zoom out I am not seeing "LY CODE 0" "L NUMBER" "L NUMBER" blocks but "0x55 CO.." "0x28 FA.." - this will be much more useful

I mean never hide most important stuff
http://screenshots.ryotsuke.ru/scr_f759909b1d37.png
I would prefer seeing values here, not parts of descr

from dsview.

v0.4 version support new protocol decoders.
Thanks.

from dsview.