Issues connecting to emulate about pylogix HOT 7 CLOSED

Open RSLinx Enterprise/FactoryTalk Linx, right click on the Ethernet driver, Properties > Advanced. Check the box "Listen on Ethernet I/P encapsulation ports". In the screenshots, I used FTVSME to configure the RSLE driver. Newer versions have FactoryTalk Linx Network Browser.

from pylogix.

Awesome that did the trick. Thanks a lot!

from pylogix.

I think I tried this some time ago and couldn't get it to work

from pylogix.

Whoa! Okay. Learned something new, today. Removing my misleading answer.

from pylogix.

@dhunt84971, no worries. there was a point where I was confidant that you could not communicate with emulate in this way. Even after I tested it and it worked for me, it still didn't work for others. I later learned about that configuration.

from pylogix.

Hi, I am not using Factory Talk, only RSLinx Classic Gateway and Emulate 5000, everything works fine with Logix Designer 5000 btw. I get : Unknown error [WinError 10061]... with pyLogix. Is there any setting I can do on RSlinx ? see below a screen shot on the advanced tab in RSLinx. Thanks!

from pylogix.

I'm only aware of this option being available with FTL. So in order to do this, you will probably have to install FTL. You wouldn't be "using" FTL to communicate, it just acts as a bridge, accepting the connection and forwarding it to Emulate AFAIK.

from pylogix.