dac1975 / gsmsim Goto Github PK

This library for Arduino to use SimCom GSM Modules. This library tested on Sim800L (5V Module). Some functions may not work other SimCom Modules like FM Radio functions. This library may work other gsm shields or modules. But some AT Commands only work SimCom modules. So some functions may not work on other gsm shield or module (etc A6 Ai-Thinker)

This library use SoftwareSerial library. So please dont forget this library's limits. Dont use this library on Arduino's hardware serial ports 0 and 1!

Firstly inport this library on your Arduino IDE. Then you can use this:

#import <GSMSim.h>

#define RX 7
#define TX 8
#define RESET 2
#define BAUD 9600

/*
 * Defaults => RX: 7 | TX: 8 | Reset: 2 | LED Pin: 13 | LED Flag: true | Baud Rate: 9600
 * GSMSim gsm;
 * GSMSim gsm(RX, TX);
 * GSMSim gsm(RX, TX, RESET);
 * GSMSim gsm(RX, TX, RESET, LED_PIN, LED_FLAG);
 */

GSMSim gsm(RX, TX, RESET);

void setup() {
  gsm.start();
  //gsm.start(9600);
}

For more details see Examples.

Cristian Steib - Sim800l Arduino library - https://github.com/cristiansteib/Sim800l

Vittorio Esposito - Sim800L-Arduino-Library-revised - https://github.com/VittorioEsposito/Sim800L-Arduino-Library-revised

Thanks.

If you have any question about this library, please contact only on GitHub.