Comments (15)
da667
commented on June 20, 2024
I just fixed this issue today. Can you download autosnort again to ensure
you are running the latest release then try this again?
…On Sat, Dec 29, 2018, 6:21 PM Shootace ***@***.*** wrote:
Hello,
I receive the error attached when trying to install Snort via the Building
VM's book. I tried downloading and installing the LuaJIT library, but
receive the same error each time. Any help would be greatly appreciated.
Thank you!
[image: img_6793]
<https://user-images.githubusercontent.com/46234434/50542925-82dc8200-0b96-11e9-9f94-4d81a61b6234.jpg>
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#61>, or mute the thread
<https://github.com/notifications/unsubscribe-auth/ACFvf94FupaT11d3HZGP3ovjuYEZeZynks5u9_j4gaJpZM4Zkvzo>
.
from autosnort.
Shootace
commented on June 20, 2024
So the new Autosnort completed successfully and rebooted. The testing of the bridge still failed. So I saw your comment on my Suricata issue. So I went into /etc/network/interfaces and it had a message that netplan(5) replaced this file. So I had to modify 50-cloud-init.yaml instead under /etc/netplan. I commented out s8 and s9 in this file. Rebooted and now s8 does not show an IP address any longer and the s8 and s9 show UP, NOARP, and PROMISC. I powered up Kali and Metasploitable 2 and the ping command does not work. Network unreachable. ifconfig on M2 shows no ip address on eth0 (only interface, besides the loopback). I have attached ifconfig from the IPS VM
from autosnort.
da667
commented on June 20, 2024
Okay, so we're on the right track. Can you verify that you have configured
promiscuous mode on the virtual network interfaces (presumably interface 2
and 3) advanced settings and set promiscuous mode to allow all or allow vms
on those interfaces?
…On Sat, Dec 29, 2018, 8:49 PM Shootace ***@***.*** wrote:
So the new Autosnort completed successfully and rebooted. The testing of
the bridge still failed. So I saw your comment on my Suricata issue. So I
went into /etc/network/interfaces and it had a message that netplan(5)
replaced this file. So I had to modify 50-cloud-init.yaml instead under
/etc/netplan. I commented out s8 and s9 in this file. Rebooted and now s8
does not show an IP address any longer and the s8 and s9 show UP, NOARP,
and PROMISC. I powered up Kali and Metasploitable 2 and the ping command
does not work. Network unreachable. ifconfig on M2 shows no ip address on
eth0 (only interface, besides the loopback). I have attached ifconfig from
the IPS VM
[image: img_7047]
<https://user-images.githubusercontent.com/46234434/50543612-28015580-0bab-11e9-8361-1d84ae244ef2.jpg>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#61 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/ACFvf6oupWM1tRPP2xSMH4xerZ4K4ug_ks5u-BusgaJpZM4Zkvzo>
.
from autosnort.
Shootace
commented on June 20, 2024
Yes I have. Please see below...
from autosnort.
Shootace
commented on June 20, 2024
ps -ef|grep snort output looks correct as well...
from autosnort.
da667
commented on June 20, 2024
Can you show me what network the metasploitable 2 vm and Kali Linux vms are
connected to, as well as their network adapter advanced settings in virtual
box please?
…On Sat, Dec 29, 2018, 9:29 PM Shootace ***@***.*** wrote:
ps -ef|grep snort output looks correct as well...
[image: img_7050]
<https://user-images.githubusercontent.com/46234434/50543858-ca700780-0bb0-11e9-900a-199ebf65891e.jpg>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#61 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/ACFvf6KzRBsfkCrzBB8CFgdvgR8-UwFEks5u-CT-gaJpZM4Zkvzo>
.
from autosnort.
Shootace
commented on June 20, 2024
Sure...I also have noticed that when Metasploitable 2 is booting up, that the "Configuring network interfaces..." fails. It stays on this screen for a few mins before getting to prompt. I have attached image of this error as well. Not sure if it is related or not.
from autosnort.
Shootace
commented on June 20, 2024
Attaching other images again, not sure why they are not showing up...
from autosnort.
Shootace
commented on June 20, 2024
And my DHCP Static Mappings in pfsense under OPT1...
from autosnort.
da667
commented on June 20, 2024
Okay so based on everything I can see here, there are two recommendations I
can make that may help.
1) navigate to advanced settings on the ips vm in virtual box. For network
adapter 2 and 3, change the adapter type to Intel pro/1000 my server.
Reboot the ips vm, reboot the metasploitable 2 vm. If that doesn't work try
setting this drop-down to "paravirtualized network" instead. It's rare, but
I've seen a few cases where switching virtual network adapter types fixed
the issue you're seeing.
2) download the metasploitable 2 vm again, and set it up from scratch. I've
seen cases where the vm itself somehow got corrupted. I have no idea how
but a fresh vm fixed the issue
…On Sat, Dec 29, 2018, 10:37 PM Shootace ***@***.*** wrote:
And my DHCP Static Mappings in pfsense under OPT1...
[image: pfsense dhcp static mapping]
<https://user-images.githubusercontent.com/46234434/50544146-415dce00-0bba-11e9-8ca0-e7e334e2741b.jpg>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#61 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/ACFvf8Tt9TUozkp2FqmJiU5-_DrqWpjjks5u-DTngaJpZM4Zkvzo>
.
from autosnort.
Shootace
commented on June 20, 2024
Recreating the Metasploitable 2 VM did the trick! When I first tried to create it, I pointed to the Metasploitable vmdk file on my E:\vbox, but received an inaccessible error. So I moved the file to my C:\vbox location and it worked. Upon bootup I immediately noticed that the "Configuring network interfaces..." was no longer failing and booted up quickly. Think you were right. it was corrupted for some reason. I changed the network adapters 2 and 3 on the IPS VM back to Intel pro/1000 MT Desktop. Booted up everything and ping commands work all the way around.
Thank you so much for helping me through this and for such a quick response!
from autosnort.
da667
commented on June 20, 2024
I'm glad to hear things worked out! Have a happy New year, and lemme know
if you run into anymore issues
…On Sun, Dec 30, 2018, 1:14 AM Shootace ***@***.*** wrote:
Recreating the Metasploitable 2 VM did the trick! When I first tried to
create it, I pointed to the Metasploitable vmdk file on my E:\vbox, but
received an inaccessible error. So I moved the file to my C:\vbox location
and it worked. Upon bootup I immediately noticed that the "Configuring
network interfaces..." was no longer failing and booted up quickly. Think
you were right. it was corrupted for some reason. I changed the network
adapters 2 and 3 on the IPS VM back to Intel pro/1000 MT Desktop. Booted up
everything and ping commands work all the way around.
Thank you so much for helping me through this and for such a quick
response!
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#61 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/ACFvf0YxCzWeAIniW4Ps685PHOoPPbWMks5u-FnWgaJpZM4Zkvzo>
.
from autosnort.
Shootace
commented on June 20, 2024
Thank you Tony. Happy New Year to you as well!
from autosnort.
shidevil
commented on June 20, 2024
I am having LuaJIT library not found as well on Ubuntu 14.04 LTS. I have already installed using sudo apt-get install luajit.
EDIT: I got it to work.
from autosnort.
BrianOrihuelaP
commented on June 20, 2024
@da667
Hi, How can i fix the same error???
I installed LuaJIT and still the error mesage ;(
from autosnort.
Related Issues (20)
- Autosnort-Ubuntu/AVATAR project - pulledpork HOT 5
- trouble running the script - Debian Jessie
- *
- Build of TCL deb package failed
- Project Avatar: Retrieving Opensource.gz fails HOT 1
- AVATAR on Ubuntu script error HOT 2
- Config file issue
- Autosnort - AVATAR Fail HOT 2
- Autosnort - AVATAR sid-msg.map not created
- IPRVersion.dat - No such file HOT 1
- AVATAR hanging during .conf download HOT 3
- AVATAR fails to download rules HOT 3
- Rules download has failed HOT 2
- Issue with Talos IP list download HOT 1
- OINKCODE not defined HOT 1
- Autosnort-Debian libdnet & daq
- ERROR 404: Not Found.
- Autosnort-Ubuntu/AVATAR fails on rule download HOT 4
- 'libarchive-tar-perl' issue
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from autosnort.