AOFI net is missing in schematics about cr10-melzi-1.1.2 HOT 5 OPEN

Passed time proved somewhat that they do not care.
And neither does anyone at OSHWA.

I did though: https://github.com/RudolphRiedel/CR10-Melzi-1.1.2

from cr10-melzi-1.1.2.

I does not really matter since the schematic is not for the same revision as the board file:
Creality3DPrinting/CR-10#1

The presence of the jumper J5 suggests that the schematic is for the prior version of the board.

from cr10-melzi-1.1.2.

I'd like to bump this issue - thanks for uploading a schematic, but there are many elements not shown on the V1.1.2 motherboard.

from cr10-melzi-1.1.2.

Passed time proved somewhat that they do not care.
And neither does anyone at OSHWA.

I did though: https://github.com/RudolphRiedel/CR10-Melzi-1.1.2

This is brilliant, thank you - this is what I was looking for, thank you for putting the time in. I'll post this on Reddit crediting you if you're ok with that.

from cr10-melzi-1.1.2.

It's public, just post the link as you wish, no need to give credit. And I believe the link has been posted on reddit before.

from cr10-melzi-1.1.2.