Comments (23)
Hello :) Thanks for your support.
In its current version, the firmware cannot be uploaded to the TC100W; and I don't know if it would work either. I must investigate. Since the battery management seems to be different, it may require some work.
from myevic.
Had a look to Wismec's website, the firmware for the TC100W is not online yet, so no investigation possible yet.
from myevic.
Man, you are fast with replying as well. Yesterday I had installed one version for my Presa TC 75 in the afternoon and there was already a new one in the evening, LOL. I love that:)
How about this, I will buy a Presa TC 100 W and capture the firmware for you and upload it?
from myevic.
Hmm, I just notice, there seems to be no tool to read the firmware, not even from the TC 75, right? Or do you possibly know one?
from myevic.
I have a way, but it's dangerous. It can definitively brick a box if something goes wrong.
Better wait for the firmware beeing online (can be long, unfortunately), or consider another 25mm box for which we have it - an eVic VTwo, for example.
from myevic.
OK, well, I get them for 24$ wholesale, worth a try for the features I could have on it:) Also, I read everywhere that even on that box, they say they recommend to use a max of 75 W. To me this all sounds like this is just the standard electronic of the Presa 75, with just the max wattage upped to 100. Isn´t this the case for the VTwo as well (max 80 watt there, but otherwise the exact same rest in terms of firmware?).
In any case, I love the Presa 75 and 100 for it´s handiness, they are so ergonomic like no other box for my personal taste. I also hate any device with a built-in battery, they will die one day and then you can throw the whole box away, nahh, thanks:)
What tool would I need to use to read out the firmware? The other way around, I could also try to just flash the My EVIC firmware to it and see what happens. Which way is "less" dangerous you think?
from myevic.
When you have it, use the NFirmwareEditor (or whatever) to extract the dataflash parameters, and we'll look at it.
from myevic.
(BTW, by looking at Wismec's site, I saw they had a new RX75 I missed. I added compatibility for it in the meantime).
from myevic.
OK great, I´ll let you know. But wondering how it is for the VTwo, is it the exact same firmware as on the Evic VTC Mini, just with the upper wattage of 80 instead of 75?
from myevic.
Yes; wattage is upped to 80W just because of the bigger battery.
But firmwares are not exactly the same; there are subtle details, such as shunt resistance value, that vary from box to box and hardware versions. Also, some boxes do not read the battery voltage in the same place, etc. Little subtle differences.
(The myevic firmware hande all that for you - it's the same binary file for all)
from myevic.
Interesting, OK, well, I will get back once I got the TC 100. Thanks for the great work!
from myevic.
It still didn´t arrive yet, but is on it´s way says "China" :)
from myevic.
Great! Just a few more weeks^^
from myevic.
More like days now, shipping never takes longer than ~10 days from China -> Europe from the vendor I always use.
from myevic.
Oh, to answer one of your questions I missed: don not try to force flashing of the myevic firmware on the box. It may work, but it'll work badly, if ever.
from myevic.
Hehe, OK, I will just let you know once I have it here so that we can walk through it. You said there is a way to possibly read the firmware and then you could possibly adapt My Evic to it?
from myevic.
Yes, there is a way.
from myevic.
Wismec released there firmware, today^^
So me too.
@dabugen : Did you receive your box?
from myevic.
Wow, great stuff to hear that! No, it did not arrive yet, stuck at custom duty this time, but should be only a few days from now. I will report back. Great work!!!
from myevic.
It's been tested by a French forumer; seems to work fine.
from myevic.
Very good!! I will reply as soon as I´ve got mine, eager to test it. Thank you!
from myevic.
So final answer is: Yes, it will.
from myevic.
Just wanted to update that it has been working flawlessly for over a week now! Thank you for the good work.
from myevic.
Related Issues (20)
- Modding X32 in VTC-Mini? HOT 1
- Primo support HOT 15
- Disabling clock on main screen RX2/3? HOT 3
- Feature request: Contrast for Screensaver HOT 2
- Wismec Predator / Sinous P80 Support HOT 8
- Clockselect??? You're back??? HOT 5
- Thoughts and suggestions HOT 20
- Wismec firmware update program not recognizing my Rx2/3 after using custom firmware HOT 3
- Info on splash screen HOT 3
- Joyetech Cuboid Tap
- rx75? HOT 1
- Wismec RX 2/3 keeps resetting to vw (power) mode HOT 3
- Is this part of code correct? HOT 1
- RX2/3, LightSleep, charging does not begin. HOT 2
- DataFlash
- RX2/3 microcontroller available pin? HOT 2
- Bypass? How to get out of bypass mode HOT 1
- "Please confirm the hardware version!!" Error when trying to install myevic firmware. Help!
- 3D Setting Reset When Swapping Battery?
- Trying to compile in 2022
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from myevic.