[Idea]Preheat + Submenu + Reset + Battery about myevic HOT 13 CLOSED

I would like the ability to adjust power to 1 watt (not 0.1) and reduce the number of taps of the fire button to turn on/off the device and navigate menu (3 clicks on/off, 2 click navigate menu - will be perfect).

from myevic.

About the 3rd idea:

Since 3.03, puff/time counter are reset by a long click on + and - buttons while editing the third line with counter blinking. It's standard behavior.

from myevic.

About the 4th idea:

I think battery meter is really enough; % won't provide more informations. It's fairly inaccurate anyway, the discharge curve depends on the battery brand and model. If I tell you 50% for 3.6 volts, it can really be anything from 25% to 75%. It would more or less be meaningless.

from myevic.

What are you talking about? Sorry, maybe I badly explained what I want? English is not my native language. I was talking about the power adjustment in vw mode. So when you press the + power was increased 1 watt, but not at 0.1 watt. And the second thing that I said to make the evic turn on/turn off after three clicks fire and 2 clicks to change mod (vw/tc/bypass).

from myevic.

This is not standard behavior, and I try to stick with Joyetech's settings the users are used to.
The best we could do is at some point give the possibility to configure those in a menu, but not set it as the normal behavior of the firmware.

from myevic.

Resistance editing has been moved in a submenu in lastest release; give it a try.

from myevic.

Ok, will wait.
When will approximately next update?

from myevic.

Ok, now looks better... I think this is a good way...
IMHO the TCR Set menu looks better if it looks like this menu, and the Power + Plus button method useless

from myevic.

The TCR Screen is already written, so I keep it.
The Power+ button serves no other purposes, so I keep it too.

from myevic.

@npocmogu: next update is already there.

from myevic.

I understand that but it not looks as same as other settings page.

from myevic.

You can replace the TCR set menu on Power + Plus button with Board temp what works with 10 or 20 click in original firmware, I don't remember...

from myevic.

I really want my fw to be as close as possible in its behavior to the original.
If I modify things as you say, an issue will soon be opened telling that "TCR Set menu is no longer available".
I known that guenuine fw is not the most user-friendly over the place, but people are used to it. I do not want to scramble habits.

from myevic.