Comments (14)
Hi @DirkRemmers ,
I can run the outlined procedure on my computer (with an NVidia RTX 3050 Ti mobile, 4 GB RAM) with no issues. I presume it is a hardware issue on your side. Would you mind executing this code, e.g. from a Jupyter notebook and posting its output here?
import pyclesperanto_prototype as cle
print(cle.cl_info())
Best,
Robert
from napari_pyclesperanto_assistant.
Hi Robert,
Thank you for the quick reply. The output is the following:
EXTENSIONS:cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_nv_create_buffer cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_device_uuid cl_khr_pci_bus_info
EXTENSIONS_WITH_VERSION:[<pyopencl._cl.NameVersion object at 0x7fdad05c9a70>, <pyopencl._cl.NameVersion object at 0x7fdb74649930>, <pyopencl._cl.NameVersion object at 0x7fdb74649cb0>, <pyopencl._cl.NameVersion object at 0x7fdb74649970>, <pyopencl._cl.NameVersion object at 0x7fdb74649070>, <pyopencl._cl.NameVersion object at 0x7fdad04c7e70>, <pyopencl._cl.NameVersion object at 0x7fdad04851f0>, <pyopencl._cl.NameVersion object at 0x7fdad03a68b0>, <pyopencl._cl.NameVersion object at 0x7fdad04dc4b0>, <pyopencl._cl.NameVersion object at 0x7fdad04c7930>, <pyopencl._cl.NameVersion object at 0x7fdad04dc6b0>, <pyopencl._cl.NameVersion object at 0x7fdad05cd8b0>, <pyopencl._cl.NameVersion object at 0x7fdad05cdef0>, <pyopencl._cl.NameVersion object at 0x7fdad0373e70>, <pyopencl._cl.NameVersion object at 0x7fdad0373830>, <pyopencl._cl.NameVersion object at 0x7fdad1119070>, <pyopencl._cl.NameVersion object at 0x7fdad0519ef0>, <pyopencl._cl.NameVersion object at 0x7fdad05198f0>]
HOST_TIMER_RESOLUTION:0
NAME:NVIDIA CUDA
NUMERIC_VERSION:12582912
PROFILE:FULL_PROFILE
VENDOR:NVIDIA Corporation
VERSION:OpenCL 3.0 CUDA 11.4.189
NVIDIA GeForce RTX 3060 Laptop GPU
ADDRESS_BITS:64
ATOMIC_FENCE_CAPABILITIES:19
ATOMIC_MEMORY_CAPABILITIES:17
ATTRIBUTE_ASYNC_ENGINE_COUNT_NV:2
AVAILABLE:1
AVAILABLE_ASYNC_QUEUES_AMD:None
BOARD_NAME_AMD:None
BUILT_IN_KERNELS:
BUILT_IN_KERNELS_WITH_VERSION:[]
COMPILER_AVAILABLE:1
COMPUTE_CAPABILITY_MAJOR_NV:8
COMPUTE_CAPABILITY_MINOR_NV:6
DEVICE_ENQUEUE_CAPABILITIES:140720308486144
DOUBLE_FP_CONFIG:63
DRIVER_VERSION:470.103.01
ENDIAN_LITTLE:1
ERROR_CORRECTION_SUPPORT:0
EXECUTION_CAPABILITIES:1
EXTENSIONS:cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_nv_create_buffer cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_device_uuid cl_khr_pci_bus_info
EXTENSIONS_WITH_VERSION:[<pyopencl._cl.NameVersion object at 0x7fdad0567af0>, <pyopencl._cl.NameVersion object at 0x7fdad05c9a70>, <pyopencl._cl.NameVersion object at 0x7fdb74649930>, <pyopencl._cl.NameVersion object at 0x7fdb74649cb0>, <pyopencl._cl.NameVersion object at 0x7fdb74649970>, <pyopencl._cl.NameVersion object at 0x7fdad04851f0>, <pyopencl._cl.NameVersion object at 0x7fdad03a68b0>, <pyopencl._cl.NameVersion object at 0x7fdad04c7e70>, <pyopencl._cl.NameVersion object at 0x7fdad04c7930>, <pyopencl._cl.NameVersion object at 0x7fdb74649070>, <pyopencl._cl.NameVersion object at 0x7fdad04dc4b0>, <pyopencl._cl.NameVersion object at 0x7fdad04dc6b0>, <pyopencl._cl.NameVersion object at 0x7fdad05cd8b0>, <pyopencl._cl.NameVersion object at 0x7fdad05cdef0>, <pyopencl._cl.NameVersion object at 0x7fdad0373e70>, <pyopencl._cl.NameVersion object at 0x7fdad0373830>, <pyopencl._cl.NameVersion object at 0x7fdad1119070>, <pyopencl._cl.NameVersion object at 0x7fdad0519ef0>]
EXT_MEM_PADDING_IN_BYTES_QCOM:None
GENERIC_ADDRESS_SPACE_SUPPORT:0
GFXIP_MAJOR_AMD:None
GFXIP_MINOR_AMD:None
GLOBAL_FREE_MEMORY_AMD:None
GLOBAL_MEM_CACHELINE_SIZE:128
GLOBAL_MEM_CACHE_SIZE:860160
GLOBAL_MEM_CACHE_TYPE:2
GLOBAL_MEM_CHANNELS_AMD:None
GLOBAL_MEM_CHANNEL_BANKS_AMD:None
GLOBAL_MEM_CHANNEL_BANK_WIDTH_AMD:None
GLOBAL_MEM_SIZE:6235422720
GLOBAL_VARIABLE_PREFERRED_TOTAL_SIZE:0
GPU_OVERLAP_NV:1
HALF_FP_CONFIG:None
HOST_UNIFIED_MEMORY:0
ILS_WITH_VERSION:[]
IL_VERSION:
IMAGE2D_MAX_HEIGHT:32768
IMAGE2D_MAX_WIDTH:32768
IMAGE3D_MAX_DEPTH:16384
IMAGE3D_MAX_HEIGHT:16384
IMAGE3D_MAX_WIDTH:16384
IMAGE_MAX_ARRAY_SIZE:2048
IMAGE_MAX_BUFFER_SIZE:268435456
IMAGE_SUPPORT:1
INTEGRATED_MEMORY_NV:0
KERNEL_EXEC_TIMEOUT_NV:1
LINKER_AVAILABLE:1
LOCAL_MEM_BANKS_AMD:None
LOCAL_MEM_SIZE:49152
LOCAL_MEM_SIZE_PER_COMPUTE_UNIT_AMD:None
LOCAL_MEM_TYPE:1
MAX_CLOCK_FREQUENCY:1425
MAX_COMPUTE_UNITS:30
MAX_CONSTANT_ARGS:9
MAX_CONSTANT_BUFFER_SIZE:65536
MAX_GLOBAL_VARIABLE_SIZE:0
MAX_MEM_ALLOC_SIZE:1558855680
MAX_NUM_SUB_GROUPS:0
MAX_ON_DEVICE_EVENTS:0
MAX_ON_DEVICE_QUEUES:0
MAX_PARAMETER_SIZE:4352
MAX_PIPE_ARGS:0
MAX_READ_IMAGE_ARGS:256
MAX_READ_WRITE_IMAGE_ARGS:0
MAX_SAMPLERS:32
MAX_WORK_GROUP_SIZE:1024
MAX_WORK_GROUP_SIZE_AMD:None
MAX_WORK_ITEM_DIMENSIONS:3
MAX_WORK_ITEM_SIZES:[1024, 1024, 64]
MAX_WRITE_IMAGE_ARGS:32
MEM_BASE_ADDR_ALIGN:4096
ME_VERSION_INTEL:None
MIN_DATA_TYPE_ALIGN_SIZE:128
NAME:NVIDIA GeForce RTX 3060 Laptop GPU
NATIVE_VECTOR_WIDTH_CHAR:1
NATIVE_VECTOR_WIDTH_DOUBLE:1
NATIVE_VECTOR_WIDTH_FLOAT:1
NATIVE_VECTOR_WIDTH_HALF:0
NATIVE_VECTOR_WIDTH_INT:1
NATIVE_VECTOR_WIDTH_LONG:1
NATIVE_VECTOR_WIDTH_SHORT:1
NON_UNIFORM_WORK_GROUP_SUPPORT:0
NUMERIC_VERSION:12582912
NUM_SIMULTANEOUS_INTEROPS_INTEL:None
OPENCL_C_ALL_VERSIONS:[<pyopencl._cl.NameVersion object at 0x7fdad079bcf0>, <pyopencl._cl.NameVersion object at 0x7fdad03b52f0>, <pyopencl._cl.NameVersion object at 0x7fdb7c22a1b0>, <pyopencl._cl.NameVersion object at 0x7fdad05198f0>]
OPENCL_C_FEATURES:[<pyopencl._cl.NameVersion object at 0x7fdad05c27f0>, <pyopencl._cl.NameVersion object at 0x7fdad05c25f0>, <pyopencl._cl.NameVersion object at 0x7fdad0513970>, <pyopencl._cl.NameVersion object at 0x7fdad3148b70>]
OPENCL_C_VERSION:OpenCL C 1.2
PAGE_SIZE_QCOM:None
PARTITION_AFFINITY_DOMAIN:[0]
PARTITION_MAX_SUB_DEVICES:1
PARTITION_PROPERTIES:[0]
PARTITION_TYPE:[0]
PCIE_ID_AMD:None
PCI_BUS_ID_NV:1
PCI_DOMAIN_ID_NV:0
PCI_SLOT_ID_NV:0
PIPE_MAX_ACTIVE_RESERVATIONS:0
PIPE_MAX_PACKET_SIZE:0
PIPE_SUPPORT:0
PLATFORM:<pyopencl.Platform 'NVIDIA CUDA' at 0x5563ffad82f0>
PREFERRED_CONSTANT_BUFFER_SIZE_AMD:None
PREFERRED_GLOBAL_ATOMIC_ALIGNMENT:0
PREFERRED_INTEROP_USER_SYNC:0
PREFERRED_LOCAL_ATOMIC_ALIGNMENT:0
PREFERRED_PLATFORM_ATOMIC_ALIGNMENT:0
PREFERRED_VECTOR_WIDTH_CHAR:1
PREFERRED_VECTOR_WIDTH_DOUBLE:1
PREFERRED_VECTOR_WIDTH_FLOAT:1
PREFERRED_VECTOR_WIDTH_HALF:0
PREFERRED_VECTOR_WIDTH_INT:1
PREFERRED_VECTOR_WIDTH_LONG:1
PREFERRED_VECTOR_WIDTH_SHORT:1
PREFERRED_WORK_GROUP_SIZE_AMD:None
PREFERRED_WORK_GROUP_SIZE_MULTIPLE:32
PRINTF_BUFFER_SIZE:None
PROFILE:FULL_PROFILE
PROFILING_TIMER_OFFSET_AMD:None
PROFILING_TIMER_RESOLUTION:1000
QUEUE_ON_DEVICE_MAX_SIZE:0
QUEUE_ON_DEVICE_PREFERRED_SIZE:0
QUEUE_ON_DEVICE_PROPERTIES:0
QUEUE_ON_HOST_PROPERTIES:3
QUEUE_PROPERTIES:3
REFERENCE_COUNT:1
REGISTERS_PER_BLOCK_NV:65536
SIMD_INSTRUCTION_WIDTH_AMD:None
SIMD_PER_COMPUTE_UNIT_AMD:None
SIMD_WIDTH_AMD:None
SIMULTANEOUS_INTEROPS_INTEL:None
SINGLE_FP_CONFIG:191
SPIR_VERSIONS:None
SUB_GROUP_INDEPENDENT_FORWARD_PROGRESS:0
SVM_CAPABILITIES:1
THREAD_TRACE_SUPPORTED_AMD:None
TOPOLOGY_AMD:None
TYPE:4
VENDOR:NVIDIA Corporation
VENDOR_ID:4318
VERSION:OpenCL 3.0 CUDA
WARP_SIZE_NV:32
WAVEFRONT_WIDTH_AMD:None
WORK_GROUP_COLLECTIVE_FUNCTIONS_SUPPORT:0
Current device: NVIDIA GeForce RTX 3060 Laptop GPU
Thank you,
Dirk
from napari_pyclesperanto_assistant.
Hi Robert,
You are probably very busy, but I wanted to ask you if you have any clue how I can fix this?
Thanks,
Dirk
from napari_pyclesperanto_assistant.
Hi @DirkRemmers ,
I would love to help, but unfortunately I cannot reproduce the issue. I can only recommend updating drivers and setting up a fresh conda environment with recent napari and clesperanto versions. It might also be interesting to see what happens when processing a 10x10x10 large image.
I hope that helps! Let me know if there are any updates or insights.
Best,
Robert
from napari_pyclesperanto_assistant.
Hi Robert and Dirk,
I am experiencing the similar problems as Dirk if I want to process 3D images in the napari viewer. I created a new environment and installed the recent napari and clesperanto versions.
I tried it on a 10x10x10 large image and get the same error as with any other 3D image, and no operation is performed:
LogicError: clSetKernelArg failed: INVALID_ARG_SIZE - when processing arg#13 (1-based):
The output after executing cle.cl_info())
in a jupyter notebook is the following:
NVIDIA CUDA
EXTENSIONS:cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_nv_create_buffer cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_device_uuid cl_khr_pci_bus_info
EXTENSIONS_WITH_VERSION:[<pyopencl._cl.NameVersion object at 0x7f3b379c1bb0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1bf0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1c30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1c70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1cb0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1d30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1d70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1db0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1df0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1cf0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1e30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1e70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1eb0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1ef0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1f30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1f70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1fb0>, <pyopencl._cl.NameVersion object at 0x7f3b379c4030>]
HOST_TIMER_RESOLUTION:0
NAME:NVIDIA CUDA
NUMERIC_VERSION:12582912
PROFILE:FULL_PROFILE
VENDOR:NVIDIA Corporation
VERSION:OpenCL 3.0 CUDA 11.4.231
NVIDIA GeForce RTX 3090
ADDRESS_BITS:64
ATOMIC_FENCE_CAPABILITIES:19
ATOMIC_MEMORY_CAPABILITIES:17
ATTRIBUTE_ASYNC_ENGINE_COUNT_NV:2
AVAILABLE:1
AVAILABLE_ASYNC_QUEUES_AMD:None
BOARD_NAME_AMD:None
BUILT_IN_KERNELS:
BUILT_IN_KERNELS_WITH_VERSION:[]
COMPILER_AVAILABLE:1
COMPUTE_CAPABILITY_MAJOR_NV:8
COMPUTE_CAPABILITY_MINOR_NV:6
DEVICE_ENQUEUE_CAPABILITIES:140728898420736
DOUBLE_FP_CONFIG:63
DRIVER_VERSION:470.129.06
ENDIAN_LITTLE:1
ERROR_CORRECTION_SUPPORT:0
EXECUTION_CAPABILITIES:1
EXTENSIONS:cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_nv_create_buffer cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_device_uuid cl_khr_pci_bus_info
EXTENSIONS_WITH_VERSION:[<pyopencl._cl.NameVersion object at 0x7f3b379c1c30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1c70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1cb0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1d30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1d70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1df0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1cf0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1e30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1e70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1db0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1eb0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1ef0>, <pyopencl._cl.NameVersion object at 0x7f3b379c1f30>, <pyopencl._cl.NameVersion object at 0x7f3b379c1f70>, <pyopencl._cl.NameVersion object at 0x7f3b379c1fb0>, <pyopencl._cl.NameVersion object at 0x7f3b379c40b0>, <pyopencl._cl.NameVersion object at 0x7f3b379c4070>, <pyopencl._cl.NameVersion object at 0x7f3b379c4030>]
EXT_MEM_PADDING_IN_BYTES_QCOM:None
GENERIC_ADDRESS_SPACE_SUPPORT:0
GFXIP_MAJOR_AMD:None
GFXIP_MINOR_AMD:None
GLOBAL_FREE_MEMORY_AMD:None
GLOBAL_MEM_CACHELINE_SIZE:128
GLOBAL_MEM_CACHE_SIZE:2351104
GLOBAL_MEM_CACHE_TYPE:2
GLOBAL_MEM_CHANNELS_AMD:None
GLOBAL_MEM_CHANNEL_BANKS_AMD:None
GLOBAL_MEM_CHANNEL_BANK_WIDTH_AMD:None
GLOBAL_MEM_SIZE:25444024320
GLOBAL_VARIABLE_PREFERRED_TOTAL_SIZE:0
GPU_OVERLAP_NV:1
HALF_FP_CONFIG:None
HOST_UNIFIED_MEMORY:0
ILS_WITH_VERSION:[]
IL_VERSION:
IMAGE2D_MAX_HEIGHT:32768
IMAGE2D_MAX_WIDTH:32768
IMAGE3D_MAX_DEPTH:16384
IMAGE3D_MAX_HEIGHT:16384
IMAGE3D_MAX_WIDTH:16384
IMAGE_MAX_ARRAY_SIZE:2048
IMAGE_MAX_BUFFER_SIZE:268435456
IMAGE_SUPPORT:1
INTEGRATED_MEMORY_NV:0
KERNEL_EXEC_TIMEOUT_NV:1
LINKER_AVAILABLE:1
LOCAL_MEM_BANKS_AMD:None
LOCAL_MEM_SIZE:49152
LOCAL_MEM_SIZE_PER_COMPUTE_UNIT_AMD:None
LOCAL_MEM_TYPE:1
MAX_CLOCK_FREQUENCY:1740
MAX_COMPUTE_UNITS:82
MAX_CONSTANT_ARGS:9
MAX_CONSTANT_BUFFER_SIZE:65536
MAX_GLOBAL_VARIABLE_SIZE:0
MAX_MEM_ALLOC_SIZE:6361006080
MAX_NUM_SUB_GROUPS:0
MAX_ON_DEVICE_EVENTS:0
MAX_ON_DEVICE_QUEUES:0
MAX_PARAMETER_SIZE:4352
MAX_PIPE_ARGS:0
MAX_READ_IMAGE_ARGS:256
MAX_READ_WRITE_IMAGE_ARGS:0
MAX_SAMPLERS:32
MAX_WORK_GROUP_SIZE:1024
MAX_WORK_GROUP_SIZE_AMD:None
MAX_WORK_ITEM_DIMENSIONS:3
MAX_WORK_ITEM_SIZES:[1024, 1024, 64]
MAX_WRITE_IMAGE_ARGS:32
MEM_BASE_ADDR_ALIGN:4096
ME_VERSION_INTEL:None
MIN_DATA_TYPE_ALIGN_SIZE:128
NAME:NVIDIA GeForce RTX 3090
NATIVE_VECTOR_WIDTH_CHAR:1
NATIVE_VECTOR_WIDTH_DOUBLE:1
NATIVE_VECTOR_WIDTH_FLOAT:1
NATIVE_VECTOR_WIDTH_HALF:0
NATIVE_VECTOR_WIDTH_INT:1
NATIVE_VECTOR_WIDTH_LONG:1
NATIVE_VECTOR_WIDTH_SHORT:1
NON_UNIFORM_WORK_GROUP_SUPPORT:0
NUMERIC_VERSION:12582912
NUM_SIMULTANEOUS_INTEROPS_INTEL:None
OPENCL_C_ALL_VERSIONS:[<pyopencl._cl.NameVersion object at 0x7f3b379c41b0>, <pyopencl._cl.NameVersion object at 0x7f3b379c41f0>, <pyopencl._cl.NameVersion object at 0x7f3b379c4230>, <pyopencl._cl.NameVersion object at 0x7f3b379c4270>]
OPENCL_C_FEATURES:[<pyopencl._cl.NameVersion object at 0x7f3b379c42f0>, <pyopencl._cl.NameVersion object at 0x7f3b379c4330>, <pyopencl._cl.NameVersion object at 0x7f3b379c4370>, <pyopencl._cl.NameVersion object at 0x7f3b379c43b0>]
OPENCL_C_VERSION:OpenCL C 1.2
PAGE_SIZE_QCOM:None
PARTITION_AFFINITY_DOMAIN:[0]
PARTITION_MAX_SUB_DEVICES:1
PARTITION_PROPERTIES:[0]
PARTITION_TYPE:[0]
PCIE_ID_AMD:None
PCI_BUS_ID_NV:193
PCI_DOMAIN_ID_NV:0
PCI_SLOT_ID_NV:0
PIPE_MAX_ACTIVE_RESERVATIONS:0
PIPE_MAX_PACKET_SIZE:0
PIPE_SUPPORT:0
PLATFORM:<pyopencl.Platform 'NVIDIA CUDA' at 0x557e7dbc50d0>
PREFERRED_CONSTANT_BUFFER_SIZE_AMD:None
PREFERRED_GLOBAL_ATOMIC_ALIGNMENT:0
PREFERRED_INTEROP_USER_SYNC:0
PREFERRED_LOCAL_ATOMIC_ALIGNMENT:0
PREFERRED_PLATFORM_ATOMIC_ALIGNMENT:0
PREFERRED_VECTOR_WIDTH_CHAR:1
PREFERRED_VECTOR_WIDTH_DOUBLE:1
PREFERRED_VECTOR_WIDTH_FLOAT:1
PREFERRED_VECTOR_WIDTH_HALF:0
PREFERRED_VECTOR_WIDTH_INT:1
PREFERRED_VECTOR_WIDTH_LONG:1
PREFERRED_VECTOR_WIDTH_SHORT:1
PREFERRED_WORK_GROUP_SIZE_AMD:None
PREFERRED_WORK_GROUP_SIZE_MULTIPLE:32
PRINTF_BUFFER_SIZE:None
PROFILE:FULL_PROFILE
PROFILING_TIMER_OFFSET_AMD:None
PROFILING_TIMER_RESOLUTION:1000
QUEUE_ON_DEVICE_MAX_SIZE:0
QUEUE_ON_DEVICE_PREFERRED_SIZE:0
QUEUE_ON_DEVICE_PROPERTIES:0
QUEUE_ON_HOST_PROPERTIES:3
QUEUE_PROPERTIES:3
REFERENCE_COUNT:1
REGISTERS_PER_BLOCK_NV:65536
SIMD_INSTRUCTION_WIDTH_AMD:None
SIMD_PER_COMPUTE_UNIT_AMD:None
SIMD_WIDTH_AMD:None
SIMULTANEOUS_INTEROPS_INTEL:None
SINGLE_FP_CONFIG:191
SPIR_VERSIONS:None
SUB_GROUP_INDEPENDENT_FORWARD_PROGRESS:0
SVM_CAPABILITIES:1
THREAD_TRACE_SUPPORTED_AMD:None
TOPOLOGY_AMD:None
TYPE:4
VENDOR:NVIDIA Corporation
VENDOR_ID:4318
VERSION:OpenCL 3.0 CUDA
WARP_SIZE_NV:32
WAVEFRONT_WIDTH_AMD:None
WORK_GROUP_COLLECTIVE_FUNCTIONS_SUPPORT:0
Current device: NVIDIA GeForce RTX 3090
Executing pyclesperanto_prototype functions via jupyter notebook works, however.
I appreciate any further ideas how to solve the issue. Thanks for your help!
Best, Carla
from napari_pyclesperanto_assistant.
Hi @carladan and @DirkRemmers ,
if you call cle-operations from a Jupyter notebook and afterwards open napari from the notebook e.g. using the following code, does it work then?
import napari
napari.Viewer()
And one more question: what operating system (versions) are you using?
Best,
Robert
from napari_pyclesperanto_assistant.
And one more idea: Can you go to the menu Tools > Utilities > Change CL device
and tell me what devices are available in that pulldown?
Also, if you install cupy, and select it in that pulldown, does it work then?
conda install cupy -c conda-forge
from napari_pyclesperanto_assistant.
Hi @haesleinhuepf and @carladan,
I just made a fresh environment and tested Roberts suggestions. My operating system is Ubuntu 20.04.4 LTS
Before installing cupy:
When using a 10x10x10 image, I still get the same error as before, just as @carladan pointed out.
I can perform cle-operations and add the results to the napari viewer as in this small script.
import napari
import numpy as np
import pyclesperanto_prototype as cle
# visualize a random image
image = np.random.rand(10,10,10)
viewer = napari.Viewer()
viewer.add_image(image)
viewer.dims.ndisplay = 3
# perform the gaussian blur on the image outside the napari viewer
cle_image = cle.push(image)
cle_result = cle.gaussian_blur(cle_image, sigma_x=2, sigma_y=2, sigma_z=2)
result = cle.pull(cle_result)
# add result to the viewer
viewer.add_image(result)
However, when I try and use the assistant within napari to do the same operation, I get the previously mentioned error.
When I try to get to the Change CL device
option, it is missing from the menu you pointed to. The only option that looks similar to what we need is the 'Tools > Utilities > Select GPU (clesperanto)' option. However, when I click this, nothing happens.
I want to let you know that I can see multiple options to open the assistant in napari as well. I see the options 'clEsperanto: Assistant', 'napari-assistant: Assistant' and 'clEsperanto' within the 'Plugins' menu, while I see 'Tools > Utilities > Assistant (na)' as well.
I tried all of these options, and I do get some error messages with some of them:
- `Plugins > clEsperanto: Assistant' gives me a warning and does not open any sidebar with all assisant options. The error is:
Traceback (most recent call last):
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/_qt/menus/plugins_menu.py", line 97, in _add_toggle_widget
self._win.add_plugin_dock_widget(*key)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/_qt/qt_main_window.py", line 699, in add_plugin_dock_widget
wdg = _instantiate_dock_widget(Widget, self._qt_viewer.viewer)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/_qt/qt_main_window.py", line 1301, in _instantiate_dock_widget
return wdg_cls(**kwargs)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari_pyclesperanto_assistant/_gui/_Assistant.py", line 26, in __init__
select_gpu()
TypeError: select_gpu() missing 1 required positional argument: 'viewer'
-
'Plugins > napari-assistant: Assistant' opens the assistant sidebar without any issues, but again, any functions will return the error mentioned at the start of this issue.
-
'Plugins > clEsperanto' is a menu that contains a number of operations. When I try to run any of these, the same error mesage as the start of the issue occurs.
-
'Tools > Utilities > Assistant (na) does open a sidebar, but also throws the same error mesage as the start of the issue when any operations are tried.
After installing cupy:
Unfortunately, all situations described earlier are exactly the same.
Hopefully this testing contains some value 😄
Please let me know if I can do anything else, and thanks for your help!
Dirk
from napari_pyclesperanto_assistant.
Hi @haesleinhuepf and @DirkRemmers,
thanks for the quick answers!
I followed your instructions and opened napari from the notebook after calling cle-operations in the code. The operations work in the Jupyter notebook, but not in the napari viewer.
If I go to the menu Tools > Utilities > Select GPU
I can only select my standard GPU (NVIDIA GeForce RTX 3090).
After installing CuPy, I am able to select cupy backend (experimental)
as GPU, but it still does not perform any operations in the viewer. It does however not even show the error messages in the napari viewer anymore, it just doesn't do anything.
My operating system is Ubuntu 20.04.4 LTS as well.
I hope this helps! Thanks very much for your input.
Carla
from napari_pyclesperanto_assistant.
- `Plugins > clEsperanto: Assistant' gives me a warning and does not open any sidebar with all assisant options. The error is:
This sounds exactly like what I got here #59
What version of napari-assistant
and napari-pyclesperanto-assistant
do you have?
I would assume your fresh env would have the latest versions, but maybe somehow not?
from napari_pyclesperanto_assistant.
Hi @psobolewskiPhD ,
My versions are:
napari-assistant
: 0.3.8 (conda-forge) (latest release)
napari-pyclesperanto-assistant
: 0.18.0 (conda-forge) (this is not the latest version listed on git)
When I update the napari-pyclesperanto-assistant
to 0.18.2 (latest version) via pip, the menu does show up. However, I still get the error message mentioned at the start of this issue.
Interestingly, I now do get the possibility to select the cupy backend (experimental)
now. When I do this and try to run all possible assistants the following happens:
Plugins > clEsperanto: Assistant
now does open up. When trying to run any function, I get the following error message:
Traceback (most recent call last):
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari_assistant/_gui/_category_widget.py", line 266, in _show_result
layer = next(x for x in viewer.layers if isinstance(x.metadata, dict) and x.metadata.get(OP_ID) == op_id)
StopIteration
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari_assistant/_gui/_Assistant.py", line 185, in _on_item_clicked
self._activate(CATEGORIES.get(item.text()))
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari_assistant/_gui/_Assistant.py", line 219, in _activate
layer = gui()
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/magicgui/widgets/_function_gui.py", line 318, in __call__
value = self._function(*bound.args, **bound.kwargs)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari_assistant/_gui/_category_widget.py", line 431, in gui_function
result_layer = _show_result(
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari_assistant/_gui/_category_widget.py", line 281, in _show_result
layer = add_layer(data, **kwargs)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/components/viewer_model.py", line 745, in add_image
layer = Image(data, **kwargs)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/layers/image/image.py", line 365, in __init__
self._update_dims()
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/layers/base/base.py", line 674, in _update_dims
self.refresh() # This call is need for invalidate cache of extent in LayerList. If you remove it pleas ad another workaround.
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/layers/base/base.py", line 1178, in refresh
self.set_view_slice()
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/layers/base/base.py", line 928, in set_view_slice
self._set_view_slice()
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/napari/layers/image/image.py", line 742, in _set_view_slice
image = self.data[image_indices]
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/pyclesperanto_prototype/_tier0/_array_operators.py", line 323, in __getitem__
result = arange(self, start_x=x_range.start, stop_x=x_range.stop, step_x=x_range.step,
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/pyclesperanto_prototype/_tier0/_plugin_function.py", line 71, in worker_function
return function(*bound.args, **bound.kwargs)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/pyclesperanto_prototype/_tier1/_range.py", line 81, in range
execute(__file__, 'range_x.cl', 'range', destination.shape, parameters)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/pyclesperanto_prototype/_tier0/_execute.py", line 3, in execute
return Backend.get_instance().get().execute(anchor, opencl_kernel_filename, kernel_name, global_size, parameters, prog, constants, image_size_independent_kernel_compilation, device)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/pyclesperanto_prototype/_tier0/_cuda_backend.py", line 42, in execute
return execute(anchor, opencl_kernel_filename, kernel_name, global_size, parameters, constants)
File "/home/dirk/miniconda3/envs/cle_39/lib/python3.9/site-packages/pyclesperanto_prototype/_tier0/_cuda_execute.py", line 395, in execute
raise TypeError(
TypeError: other types than float and int aren`t supported yet for parameters start_z : 0 .
function rangetype <class 'numpy.int64'>
-
Plugins > napari-assistant: Assistant
opens the assistant sidebar without any issues, however, the same error message as above occurs when running any function. -
Plugins > clEsperanto
is a menu that contains a number of operations. When I try to runvoronoi otsu labeling
, the same error mesage as the start of the issue occurs. -
Tools > Utilities > Assistant (na)
shows the same error as mentioned above when trying to run any function.
Unfortunately updating to 0.18.2 did not solve the issue, good suggestion though!
Thanks for all the help everyone!
Dirk
from napari_pyclesperanto_assistant.
My operating system is Ubuntu 20.04.4 LTS as well.
@DirkRemmers @carladan you are obviously both running Linux. I guess that's no random coincidence. Which Nvidia driver version do you have installed?
from napari_pyclesperanto_assistant.
My nvidia driver version is 510.73.05
from napari_pyclesperanto_assistant.
Hi,
my Nvidia driver version is 470.129.06.
from napari_pyclesperanto_assistant.
Related Issues (20)
- FYI: on napari main (0.4.13.dev171+ge4f745f) Assistant fails to work HOT 2
- plugin not visible while installed HOT 3
- Blobs sample missing in 0.15.0 HOT 3
- Some sub-widget spawns wide and block resizing in 0.15.1 HOT 9
- Two Voronoi Otsu Labelings, but one results in error HOT 1
- Connected component labeling returns error on macOS M1 HOT 6
- `Operation failed` for images imported with `napari-aicsimageio` (xarray issue?) HOT 7
- Bugs when using functions from nsbatwm HOT 5
- Make user interface independent from clesperanto and move code to new repository HOT 2
- Unable to launch clEsperanto-Assistant HOT 11
- The proximal neighbor count map is empty on large 2D images HOT 1
- Multiple GPUs with the same name cannot be selected / differentiated
- Installation with conda errors HOT 1
- Neighbourhood-based measurements are not computed
- Assistant should provide clear warning when pyopencl not installed
- combine_labels should show up in the assistant and in the menu
- somewhere package dependency 'pyrsistent' got dropped HOT 1
- Installation issues - PackagesNotFoundError HOT 2
- Error in starting Assistant(na) HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from napari_pyclesperanto_assistant.