CIDR issue about clc-go-cli HOT 4 OPEN

Sure, I'll take a look.

from clc-go-cli.

I had a look at this and you can specify multiple CIDR as source restrictions. I used the following command:

clc server update-public-ip-address --server-name MYSERVERNAME --public-ip xxx.xxx.xxx.xxx --ports port=80,protocol=tcp --source-restrictions "CIDR=70.100.60.140/32" "CIDR=71.100.60.0/24"

from clc-go-cli.

@richardcase so the space vs. a comma was the trick.

I was issuing clc server update-public-ip-address --server-name MYSERVERNAME --public-ip xxx.xxx.xxx.xxx --ports port=80,protocol=tcp --source-restrictions "CIDR=70.100.60.140/32","CIDR=71.100.60.0/24"

should we maybe put something in the code as the command is accepted with a comma but doesn't do anything but the last ip listed. not what we should have I'd think.

from clc-go-cli.

That's a good point. I'll see what I can do.

from clc-go-cli.