tun2socks on Win7 doesn't work about badvpn HOT 6 CLOSED

It appears that tun2socks is not receiving any packets from the operating 
system. Have you followed tun2socks my guide on the wiki? It explicitly says 
that you have to assign the right IP address to the TUN device yourself 
(10.0.0.1 netmask 255.255.255.0 for the command line you posted), and it does 
not appear you did so. You also set up the routes properly.

Please try the guide first and report problems after you're sure you did 
exactly what it says.

[deleted comment]

maskeye, in your case too the OS is not sending any packets into the Local 
interface. You have to adjust the routing table properly. Either add the 
route(s) you want manually, via the gateway 10.0.0.2, or configure it as a 
default gateway in the IP configuration dialog for the Local interface. Anyway, 
it would help if you provided your routing table (route print) and IP 
configurations of both interfaces (write down or screenshot).

maskeye, it's likely that your metrics are incorrect and that the OS is still 
using the default gateway of "Local Area Connection". There are multiple ways 
to achieve the desired routing; one is by forcing the new tun2socks route to 
have a lower metric than the existing "Local Area Connection" route.

Alternatively, you can remove the default gateway from "Local Area Connection" 
and only have the tun2socks route. However this is inconvenient when you want 
to not use tun2socks.

It works great on my computer. I can share my ssh internet connection trough 
wifi hotspot with this tiny tools. Just a little tricks and we can enjoy shared 
ssh internet connection. Haturnuhuun mas bro..o