Uploading the sketch to the Arduino in UBUNTU 14.04 LTS about ardublockly HOT 5 CLOSED

Could you copy the contents of the ArdublocklySketch.ino? It would also be useful if you could upload the ardublockly.log (and ardublockly2.log if it exists) files somewhere where I could download them or you could send them to me by email.

Which version of the Arduino IDE are you using?

from ardublockly.

Hi Carlos,

I did not find the ardublockly.log file

The Arduino IDE version is – 1:1.0.5+dfsg2-2

I copied the CLI command:

/usr/bin/arduino --upload --port /dev/ttyACM0 --board arduino:avr:uno /home/labvad/DB4k/DB4KA915/ArdublocklySketch/ArdublocklySketch.ino

to the Terminal, and I got the same problem: I receive a window with the message: bad file selected: Processing can only open its own sketches and other files ending in .ino or .pde.

And then the arduino IDE opens with the code.

Thank you

Best regards

Rubens.
ArdublocklySketch.ino.tar.gz
Pythonshell_ArdublocklyServer_Ubuntu.pdf

from ardublockly.

I see, you are using Arduino 1.0.5, which does not support the command line interface. You will need 1.6 or higher (I would recommend the latest one available from the Arduino website).

from ardublockly.

thank you so much,

from ardublockly.

No problem, glad you got it working.

from ardublockly.