Comments (16)
Same here. It looks like it is a problem with solo.ckpool.org.
I think also this is the problem. Now i changed to eu.stratum.slushpool.com and everything is working again.
from nerdminer_v2.
Same here. It looks like it is a problem with solo.ckpool.org.
from nerdminer_v2.
18:57:25.205 > Client not connected, trying to connect...
18:57:25.334 > [2267507][E][WiFiClient.cpp:268] connect(): socket error on fd 48, errno: 104, "Connection reset by peer"
18:57:25.334 > Imposible to connect to : solo.ckpool.org
18:57:26.334 > Client not connected, trying to connect...
18:57:26.338 > >>> Completed 0 share(s), 0 Khashes, avg. hashrate 0.000 KH/s
from nerdminer_v2.
I have the same error since 10-15 minutes.
from nerdminer_v2.
Having the same problem right now. Running the latest firmware (tag Release1.4).
All the values are 0 except the time counter (tried solo.ckpool.org, eu.stratum.slushpool.com, eu.stratum.braiins.com).
from nerdminer_v2.
I had the same problem and switched to btc.zsolo.bid:60 7
This pool is currently working fine for me 👍
from nerdminer_v2.
Having the same problem right now. Running the latest firmware (tag Release1.4).
All the values are 0 except the time counter (tried solo.ckpool.org, eu.stratum.slushpool.com, eu.stratum.braiins.com).
Now it worked once after I've reset it a couple of times. But after I assembled it in the case and switched it back on, same behaviour. All 0, except the clock.
from nerdminer_v2.
Now I understand why my ZSolo miner has went to zero. Thanks all
ZSolo pool appears to be responding again. Did a reboot and all fine.
from nerdminer_v2.
What "fixes" it for me is to reboot the router, while the NerdMiner is running.
Then the mining starts.
from nerdminer_v2.
I have a PiHole in my Network and one Blocklist included "Mining Pools".
from nerdminer_v2.
I still have this problem, and I tried all the solutions in this thread, none worked.
@gaelbenoit how do you debug the card ?
from nerdminer_v2.
I still have this problem, and I tried all the solutions in this thread, none worked.
@gaelbenoit how do you debug the card ?
Have you tried connecting to a different wifi network ?
You could even try using your mobile phone as hotspot to see if it works just to rule out a connection issue.
from nerdminer_v2.
@btc-ss , yes i try to connect nerdminer to my smartphone wifi hostpost and now it works !
But it's obviously not very convenient. How can i make the nerd miner connect to my home wifi network ?
from nerdminer_v2.
@btc-ss , yes i try to connect nerdminer to my smartphone wifi hostpost and now it works ! But it's obviously not very convenient. How can i make the nerd miner connect to my home wifi network ?
Now you need to figure out what on your wifi router is blocking your Nerdminer connection.
You'll have to research your wifi router for similar issues where it blocks access. Figure out how to make it allow. Maybe related to specific port access or needs to be opened. That's my guess. Good luck and at least now you know it works.
from nerdminer_v2.
I think it can only connect to 2.4 GHz wifi networks, so you may need to enable 2.4 GHz on your wifi router.
from nerdminer_v2.
I think it can only connect to 2.4 GHz wifi networks, so you may need to enable 2.4 GHz on your wifi router.
I have both of them on my router
from nerdminer_v2.
Related Issues (20)
- Bootloop Espressif32 6.7.0 HOT 6
- hellow HOT 1
- nerd miner HOT 2
- Nerdminer Quattro.
- Web Dashboard after configuration HOT 1
- Bin for ESP32-2432S028R seems to be not available in web flasher HOT 5
- M5Stack / M5 Stick ESP32 HOT 2
- ESP32-2432S028R screen colors still inverted in FW v1.6.4 HOT 1
- Hashrate is zero when configuring new WLAN with a NerdMiner V2 that was already configured before. HOT 3
- KH/s em 0
- Long SSID password (40 char) doesn't work
- 1.14 Inch TFT Display ESP32-S3 Development Board with PH2.02P Power Port for Arduino MCU Module USB Type-C ESP32 S3
- output of sha256d seems wrong HOT 4
- Arduino compilation problem HOT 1
- guide to build from source HOT 2
- Lilygo T-Display S3 Amoled V2 (H713) No Display HOT 1
- bin/bin LILYGO TDisplay S3/0x10000_firmware_v1.6.3.bin HOT 1
- Yes
- nerdminer-prerelease-v1.7.0 how to run it HOT 4
- Nerd Miner v2 won't mine
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from nerdminer_v2.