can't copy SD card on raspberry pi anymore about rpi-clone HOT 5 OPEN

@lebo202002 while cd'ed into your git clone of the github rpi-clone repo, do git checkout 2d8412d. This winds you back to rpi-clone 1.x. Then run sudo ./rpi-clone sda.

from rpi-clone.

I see the same issue on Raspbian Jessie with the recent rpi-clone update: since the cloned mSD on sda has the same part IDs as the mounted boot mSD, rpi-clone (or maybe some of the tools it uses) thinks that sda mSD is actually mounted on "/", while it isn't mounted, as df shows: /dev/mmcblk0p1 is still mounted as /boot and /dev/root as /.

from rpi-clone.

More details: I selectively moved backwards along master until 2d8412d, which is the last working 1.x version. From 2.0 on, rpi-clone fails as it thinks that the backup mSD is already mounted on /.

from rpi-clone.

@thediveo Brillant! Thanks! 2d8412d works for me on cloning retropie image to smaller sd card!

from rpi-clone.

Hello, i have the same issu with the version 2.0 (the last) on my raspberry pi 3 I want to clone my SDD on a SD card. error : Initializing Imaging past the start of /boot partition 2. => dd if=/dev/sda of=/dev/mmcblk0 bs=1M count=50 ... Resizing last partition to end of disk ... Resize failed. See /tmp/rpi-clone-output. Try running rpi-clone again.
i had tyr to put the code 2d8412d but he don't work : error : Final check, is it Ok to proceed with the clone (yes/no)?: yes => Mounting /dev/mmcblk0p12 (no label) on /mnt/clone mount: special device /dev/mmcblk0p12 does not exist Mount failure of /dev/mmcblk0p12, aborting!

How I can do to clone my SSD ?

sorry for my bad English I'm French ^^
thank for you futur answer

from rpi-clone.