Comments (6)
a second voice for this support -- I just acquired a raspberry pi 3 and thescript does not work; the NOOBS sD card (16gb) contains
/dev/mmcblk0:16,1GB:sd/mmc:512:512:msdos:SD USD:;
1:4194kB:1172MB:1168MB:fat32::lba;
2:1172MB:15,8GB:14,6GB:::;
5:1174MB:1208MB:33,6MB:ext4::;
6:1208MB:1274MB:66,1MB:fat16::lba;
7:1275MB:15,8GB:14,5GB:ext4::;
and the mounted partitions are #6 and 7:
/dev/mmcblk0p6 /boot vfat defaults 0 2
/dev/mmcblk0p7 / ext4 defaults,noatime 0 1
from rpi-clone.
since the new Raspi kernel has been released in April, there is eventually a SD cloning tool in the menu bar which works fine even for cloning images on different sized SD cards (as long as it wouldn't run out of memory) and it works currently very satisfactorily. So raspi-clone is actually not needed so very urgently any more.
from rpi-clone.
thank you for the news, the version I have is dated Feb.25 2016, just a bit too old... Anyway with the mixture of dd and rsync commands
detailed in your script, it was not too difficult to realize the cloning...
Thanks for your help !
Le 23/09/2016 à 12:59, shiftleftplusone a écrit :
since the new Raspi kernel has been released in April, there is eventually a SD cloning tool in the menu bar which works fine even for cloning images on different sized SD cards (as long as it wouldn't run out of memory) and it works currently very satisfactorily. So raspi-clone is actually not needed so very urgently any more.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub #26 (comment), or mute the thread https://github.com/notifications/unsubscribe-auth/ASvmrE1JuAW_OMA1NDbmO1sr4jVpedu8ks5qs7D-gaJpZM4Ib42J.
from rpi-clone.
@shiftleftplusone @fochs not intended as a competitor - I hope to keep contributing to rpi-clone core functionality - but I've just released a new tool called ClonePi tool which supports NOOBS multi-partition setups...
https://github.com/SpoddyCoder/clonepi
from rpi-clone.
thank you, but since the latest Jessie releases have that great partition cloning tool in the launch panel I'm absolutely fine with this feature, both for bigger target SDs and even when down-cloning from 32GB to 16GB SD cards.
from rpi-clone.
@shiftleftplusone thanks for the feedback - I've developed it primarily to run on headless Pi's, so didn't even know this existed in Pixel.... runs off to test it out
from rpi-clone.
Related Issues (20)
- Feature request: Do not fully use target drive
- SDA partitions created then not found -> abort HOT 34
- Rpi-clone on Debian 12 HOT 6
- sys-clone fails to mount cloned sd card on subsequent sync HOT 10
- I opened a separate issue for this here [https://github.com/billw2/rpi-clone/issues/163](url)
- Use a symbolic link instead of copy to /usr/local/sbin/..
- FATAL: partition mismatch HOT 1
- Problem on Orange Pi 3B, Debian Bookworm cloning from /dev/mmcblk0 to /dev/mvme0n1 HOT 6
- official rpios bookworm issue HOT 172
- RPi5 HOT 3
- Destination Disk Label with Space
- Q: clone to USB Flash Stick for backup; how to restore? HOT 3
- nuc and rpi-clone HOT 1
- Unable to boot after cloning from SD to SSD HOT 5
- rpiclone does not handle copying from microsd to ssd pcie 2.0 nvme raspberry pi5 HOT 1
- A friendly fork of rpi-clone (updated for modern Pi) HOT 3
- Date of clone is not available in log file (solution included)
- My rPi SD Card that I attempted to Clone won't boot anymore HOT 7
- Cloning an MVMe M2 SSD connected to a PCIe NVMe card - Could not stat device /dev/nvme0n1p HOT 2
- rpi-clone -f sdb error: sed: couldn't open temporary file /mnt/clone/boot/firmware/sed3GoEiW: Read-only file system
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from rpi-clone.