Best way to update ? about bespokesynth HOT 5 CLOSED

hmm, I don't think I made any explicit changes to serialization in between builds, so that's curious that it crashes now. if you attach a .bsk that loaded in the old build and no longer loads in the new build, I can take a look to see what might have changed

from bespokesynth.

Here one:
circle with random++2.bsk.zip

from bespokesynth.

it's failing to load for me, but it looks like it's happening because I'm missing the VSTs that you have. I just added an update in 3f52f96 to handle this failure more gracefully, as shown in the attached image. the state will still load, just with unloaded VSTs.

in the meantime, I think you could likely resolve this if you open Bespoke, click the "vst plugins" dropdown on the top bar, click "rescan vsts...", then load your state again. scanning for VSTs will take a while and will make Bespoke appear temporarily frozen, but you only need to do it once and it will save the VST list for the future. in 87c1cd7 I changed how VST loading works, which is what I suspect caused this issue for you.

let me know if rescanning VSTs doesn't resolve your issue.

from bespokesynth.

Hello, thanks but no, this don't resolve the issue, ( but maybe not a big deal , i can also rebuild these patches...)
Some other thing i notice with this last version:
At first i think the defaut blank .json is not recreated, so i need to rebuild gain/splitter/outputs 1 & 2
but even this way i don't have sound.
so i test with an old userfrefs.json and it works
so i finally delete these 2 lines:
"audio_output_device" : "auto", "audio_input_device" : "auto",
works, but only in mono ?
( for info i see signal activity on both wires and my outputs 2 is set to 2
And finally i dezoom the main interface and i realize the gain/splitter/outputs 1 & 2 modules was here but hidden in the low low part and that's why it don't work... ;-)

from bespokesynth.

but you're right about Vst's cause if i open an old patch without any vst's it works

from bespokesynth.