Shift not overruled by larger breakpoint? about hedron HOT 4 CLOSED

It's not fully documented yet, but you can view the 1.0.0 storybook here. It's still under heavy development, so if you have any questions or comments for us don't hesitate to reach out either on here or in our slack group

from hedron.

Thanks for the issue report! This is actually a bug, mdShift is not overriding smShift because the value for mdShift is 0, which is equal to no value. Since hedron thinks there's no value set for mdShift, it doesn't override smShift. A workaround for now would be to use a string value for mdShift.

Like this: https://www.webpackbin.com/bins/-KhYZwKLLE0C5JuNjHik

It's going to spit out a warning when you're in development mode (since it's expecting a number, not a string). But in production mode there will be no error (since PropTypes aren't used in production).

This issue is not present in hedron >1.0.0 (installable via hedron@next), since the shift property can accept strings, numbers, and objects.

from hedron.

I was just playing around but it's good to know that the behavior I was expecting was correct. I will switch to 1.0 now, since that one seems to have a lot of improvements in general 👍

from hedron.

This was resolved via 1.0.0

from hedron.