About the Plotter Limit Switch about cnclib HOT 4 CLOSED

I have changed the library to store some parameter - e.g. the referencemove - in the EEPROM.
I have not checked the plotter sample. I will do this in the next days

from cnclib.

Thank you. I'm going to look forward to your update. The In addition, can i use msplot driver to control. I am a rookie please don't mind if I childish problem.

from cnclib.

I have updated the plotter sketch. Now the endstop (min or max) can be configured in the sketch or in the eeprom.

• EEprom: use the windows app CNCLib.Wpf.start and connect to your arduino plotter.
  With the button "EEprom" (after you are connected) you can read and modify the eeprom.
• Sketch: see configuration.h

Endstops are used at (arduino) boot time to find the current position. After boot the specified size is used to limit the movements.

I have not used the msplot driver at all. But I will look for it.

from cnclib.

New program I have tested. very good.
Thank you for paying,
Good luck!
Namo Amitabha

from cnclib.